Agitator predator net HD XL Spare Mesh

Agitator Predator Net HD replacement mesh:

The Agitator Predator Net HD replacement mesh utilises the unique designed of our Predator Net HD’s easily removable frame retention spigots allowing you to replace the mesh whenever required, greatly increasing the life span of the product making your investment into the Agitator Predator Net HD even better value for money!

Our HD 20mm quick-dry rubberised mesh creating the perfect balance between fish care, durability, and easy hook removal, should your hooks ever become snagged in the net.

The extra deep HD mesh allows for easy and secure fish recovery either over the side of the boat or in the margins, and comes with a webbing strap and anchor point at the base of the net allowing the net to be manoeuvred easily without catching on any obstacles.

• 1. Remove the handle from the spreader block using the 2 bayonet push buttons.
• 2. Using a 2.5mm hex key, remove the 4 retaining screws from the spreader block, Slide the machined retention spigots from the rear of the spreader block and pull the frame clear of the spreader block
• 3. To remove the mesh from the frame slowly slide the mesh around the frame a few inches at a time removing the same few inches of mesh from the opposite end of the frame as you go, once you have reached the half way point the whole mesh should then slide clear of the frame easily.
• 4. To replace simply slide the replacement mesh back onto the frame a few inches whist guiding it around the frame as you go, making sure the frame does not pop through mesh at any point.
• 5. Re-assembly of the net is simply the reverse of step 1 to 2.